Changing from single point to muti point injection

[Astra__mk3]

Hi can anyone tell me more about single to multi point injection please im looking into doing this I have a 8v 1.6 mk3 astra

 

[TMODAlpha]

You'll need the head, intake manifold, Ecu, throttle cable and wiring loom from a c16se or e16se.

E16se head will need the egr valve hole at the back blocking off.

Have a search. Been covered many times.

 

[Astra__mk3]

Can you have a look at this for me plz....is this what I need its on ebay here is the item number 401021887527

 

[TMODAlpha]

Looks right. You'd need the head too really.

 

[Astra__mk3]

Is it a straight swap in regards to the head and will I need the ecu and wire loom cheers for the advice and help its much appreciated mate

 

[Astra__mk3]

Also mate im looking into the head now is it a c16se head I need?

 

[Astra__mk3]

Sorry for all the posts but could you tell me what I need to search for......is it a c16se manifold inlet,throttle body,head,wiring loom?

 

[astranaut]

Head, engine loom, that inlet fannymould, throttle cable is different so you'll need that, also a fuel pump (from either the car the engine came from or any 16 valve pump will do), you'll probably need a different hose for the servo as well, seem to remember it's different. Ecu as well, if it's an immobilised ecu make sure you get the chip and transponder to match

 

[Andy_Mk3]

C16SE is what you want. But you can use an E16SE head, you just need to blank off the EGR as Marc said above.

This is most of what you need:

 

[Astra__mk3]

Do they both give the same hp

 

[Astra__mk3]

Can I just ask firstly thank you for taking the time to help me how much power am I expected to get by doing this also does any one know where I can get all the parts from.

 

[Andy_Mk3]

Ebay, forums, scrap yards etc.

Mine made 99.9bhp after being converted. Absolutely brilliant engine.

 

[edessex]

...fannymould...

Hehehe.

 

[Astra__mk3]

Im a novice when it comes to all this would I be able to fit it my self cheers everyone

 

[edessex]

Only you can answer that question. You have to change the head, have you ever done a head gasket before?

 

[Astra__mk3]

Will a 16v head fut on my 8v ive found somone who has all the parts

 

[TMODAlpha]

No

 

[edessex]

It has twice the number of valves, so no it won't fit.

 

[Astra__mk3]

which engines have the mpi i thats compatible?

 

[astranaut]

C16SE is what you want. But you can use an E16SE head, you just need to blank off the EGR as Marc said above.

This is most of what you need: