does anyone know how to take out the back seats,the back rest part that that folds up and down?
-
VBOA National Rally Booking now Open
Want to remove ads? Become a MK3OC Club Member today!
back rests
- Thread starter Mullens
- Start date
2 different way's, second one is easier:
17mm spanner - squeeze it to the bolt at the out edge of the seat - looking from the back (you'll probably need to get in the boot...) - loosen it off a tadge, then should come un-done freely by hand.
Same again for the centre bracket.
OR:
You'll need a large star drive - fold the seats flat and on the bottom corners there is a small carpet flap that you'll be able to lift up - now you should be able to see the 2 large star driver bolts. Un-do these (will need a bit of muscle...) and when the brackets are un-done from the lower corners of both seats, the seats will pull out.
Then you'll need a 17mm spanner - use this to loosen the oddly shaped bolt's attatched to the car (and centre bracket).
Seats and brackets will now be out of the car
17mm spanner - squeeze it to the bolt at the out edge of the seat - looking from the back (you'll probably need to get in the boot...) - loosen it off a tadge, then should come un-done freely by hand.
Same again for the centre bracket.
OR:
You'll need a large star drive - fold the seats flat and on the bottom corners there is a small carpet flap that you'll be able to lift up - now you should be able to see the 2 large star driver bolts. Un-do these (will need a bit of muscle...) and when the brackets are un-done from the lower corners of both seats, the seats will pull out.
Then you'll need a 17mm spanner - use this to loosen the oddly shaped bolt's attatched to the car (and centre bracket).
Seats and brackets will now be out of the car
ok cheers for the help mate.